It’s not for everyone, but personally I find that making my own gear, whether for bike or kayak, is a deeply satisfying way of extending my enjoyment of those activities, as well as fulfilling a need I seem to have to be engaged in something creative from time to time. It’s also a great way to modify, repurpose, and recycle old gear, and of course, save money.
Up until now everything I’ve made has been somewhat “free form” in terms of design.. making it up as I go, or a process of turning an idea into reality through a number of iterations and improvements, with some help along the learning curve, that started back 2018, from YouTube and few “how-to” articles on the web. It can be time consuming making a new bag when it’s the first of its kind, never a problem during the dark winter months, but back in March however I needed a bag quickly for the Faran and its impending shake-down tour through Spain. I’d decided that my usual front end setup of a dry bag and harness wasn’t going to work so well for me, with the drop bars, as it does on bikes like my ECR. Rather than faff about with designing a small version of the larger roll-entry bag I made for the ECR a couple of years ago I turned to The Functional Sewing Project and downloaded, for US$20, the pattern for the “Junk Trunk“, which in their words is “a large Carradice style handlebar or saddle bag, well suited for big bikepacking adventures, or everyday riding”.

As a resource, The Functional Sewing Project is a terrific idea and came about out of the closure of Colorado-based bag maker Rocky Mountain Toast. Rather than simply disappear, the decision was made to make the patterns for a few of their designs available for others to download and use, in return for a relatively nominal fee. While the bag here is perhaps a more “advanced”project and does require access to a heavy duty or industrial type sewing machine, there are some simpler projects that should be possible with a domestic machine. Don’t forget also the excellent archive of “Make Year Own Gear” articles over on bikepacking.com. If you do have access to a machine that is up to the task however, and in the market for a bag of this kind, then the materials costs here in the UK I think came to about £35 – a huge saving over a retail example, and you have the possibility to save further by making use of recycled fabrics and parts. I’ll describe the bag below with some photos and a few comments that may be helpful, and include some links to where I sourced the materials needed. The pattern and step-by-step guide were excellent – I’d highly recommend it, albeit not as a first sewing project.
With a capacity of 18 litres in the main compartment, and 1.5 litres per expandable side pocket, it’s the perfect size to fit with the Ritchey Beacon XL bars on my Faran. I was keen to see the pattern too as there are always things to be learned from the way others construct a bag or solve problems; in this case it was well worth the $20 as it gave me some new ideas that I want to carry forward into another design, as well as allowing me to knock out a bag really quickly. I confess was tempted to modify the design straightaway but decided I’d benefit more by following it faithfully, and then taking away thoughts and experiences from that into the next one.
Having made it, and used it for a month, I will make another at some point – primarily it will be an inch or two deeper to better make use of the taller head tube on the Faran, and to accommodate my MacBook Air vertically. I would also probably ditch the rear “quick access” zip; I can see how it would be useful but in my case, travelling with a frame bag and a waist camera pack, I never used it. The layers of fabric do become rather thick around the zip ends which made assembling the body of the bag tricky. This one won’t be wasted when I make another, a mate wants it.
Update: While this article is not intended as a “step-by-step how-to”, the pattern is pretty good in that respect, there are a number useful tips and suggested changes in the comments below, and I did make another without the zip – extend the pattern for the back piece upwards by an inch.

The pattern and accompanying booklet have a detailed list of everything you need to make the bag. I buy most of my fabrics, webbing, and fittings from Point North (https://www.profabrics.co.uk/). I’ve found them to be pretty much the best supplier in the UK in terms of range of outdoor fabrics for bags and similar, and while the range of what’s available is more limited than in the US they have pretty much everything you’ll need, and are fantastically helpful if you have questions. I’ve linked the fabrics in the caption above and below. Another handy source I’ve used in the past is Contact Left (https://www.contactleft.co.uk/) who have a range of fabrics and fittings very much aligned with the military and tactical flavoured market… lots of camo stuff if that’s your bag, so to speak.
The Junk Trunk pictured does require some additional materials in the form of 4-5mm thick EVA foam, a sheet of tough, rigid plastic of 4-5mm thick for the back, and a sheet of flexible polypropylene of around 1mm thick to give shape to the body. Plastics suppliers on eBay are a good source, but not necessarily the cheapest. For this bag the rigid rear back piece was cut from a cheap tray found at Pound Land for, errm, £1, and the larger flexible sheet came from a modelling store for a significantly lower price than that quoted for similar on eBay: https://modelshop.co.uk/Shop/Item/Polypropylene-frosted-sheet-1-1-400-600mm/ITM8843 . I sourced the EVA foam from the same place: https://modelshop.co.uk/Shop/Item/EVA-CF65-craft-foam-5-0-500-500mm/ITM8024. (update: those two links are now dead sadly)









The Functional Sewing Project is here: https://www.thefunctionalsewingproject.com/








This looks fantastic! I’ve been looking at the junk trunk for several months now and your post finally made me order the pattern.
I really like your idea of using Cordura for the main body, I have plenty of Cordura leftovers to do the same thing, but wondered how much vx21 you ordered? Was half a metre enough or did you need a metre?
Many thanks!
hey Ewan, thanks for getting in touch and pleased to hear this post has been helpful. For the VX21, yep with the Cordura body 1/2 metre was enough. I’ve actually just made the deeper version I mentioned in the post. Added 2 1/2″ to the depth, and half-metre was still enough.
Cheers!
Mike
oh one other thing.. first time around, i scribbled the following on the pattern for the main collar “in future make this part 1/4″ longer – facing and lining”.. reason being that in assembly it wraps around the outside of what is the main body assembly at that point, the circumference of which is likely slightly larger than the strictly computed value, and having the extra 1/8 inch each side gives a little more leeway in the seam when joining it all up. I did that on the second one and it was perfect.
Hi Mike,
Thanks for your reply and the extra details from experience! Really appreciated. Did you do the second one without the zip as you mentioned? I don’t like the zip design so would also like to omit this. Did you have to do anything differently?
I did leave the zip out. the back pieces, lining and face, just need to be an inch taller. The reinforcement piece under the webbing, I folded the top of that under itself by 1/2″ and then placed that folded edge 1/2″ below the seam at the top of the bag (so 1″ below the top edge of the back). on reflection, in future I’d just make the reinforcement piece 1″ deeper and take it all the way to the top of the back, so it’s also in the seam, if that makes sense
while am at it.. other things.. on the second one, i cut the plastic for the back from the base of a cheap Ikea tray (https://www.ikea.com/gb/en/p/tillgang-tray-grey-10419950/). it was 3mm thick and seems to be plenty stiff enough. the place I first got the 0.8-1mm polypro sheet from has shut down so bought a sheet of 0.8mm polypropylene off ebay. bit more money but hey ho.
oh another tip, I don’t have an eyelet press, so rather than bother my friend who does, instead of eyeletting the webbing for the pocket draw strings, I replaced it with a loop of 20mm webbing and square d-ring.. here’s a pic:
These extra details and design notes have been invaluable! So glad I stumbled across your page this morning. Thank you!
you’re most welcome. happy to help, and struggling to engage with work today anyway ;-)
Thank you so much for this post, it was a great complement to the original pattern.
I followed your advice and removed the zipper, adding the extra inch of fabric and used square D-rings instead of eyelets. I really love how it looks !
You also inspired me to make a bunch of other changes: clip buckles instead of velcro on the side pockets, a fully lined drawstring closure for the main compartment, an aditionnal elasticated pocket on the inside and I completely changed the big flap so that it wraps around the bag much better.
Your site has really been my main reference for the project, thank you so much for the inspiration and tips !
hey, that’s great to hear, thanks for writing, I’m happy to have been useful, and your comments about your modifications will be useful to others too I’m sure, so thanks! You’ve also reminded me I should post a few photos of the deeper version that I made.
It’s such a nice bag and as a foundation for making modifications it’s brilliant, having a pattern available removes a lot of the initial difficulty in figuring out how to construct such a bag.
Cheers!
Mike