Bits and Bobs for a Rainy Start to 2026

Rain, some vintage Record hubs, a Gilles Berthoud saddle, and also rain.. did I mention the rain?

“It rained.
It had been raining for seven years; thousands upon thousands of days
compounded and filled from one end to the other with rain…”

– Ray Bradbury, All Summer in a Day

It was seven weeks of relentless rain rather than seven years, but it certainly felt like seven years…. Ray Bradbury wrote All Summer in a Day back in 1954, when no-one knew the clouds wrapping Venus were comprised of sulphuric acid, rather than water, and logic suggested clouds meant persistent rain… I wondered if in fact he might have been blessed with some prescience and was in fact writing about Cornwall in 2026. His short story centres on Margot, a girl who remembers the sun from her time on Earth and longs for its warmth and light. A sentiment deeply familiar to the Cornish in late February. Bradbury wrote another, equally relevant, short story, also based on Venus, in 1950, The Long Rain. It contains this passage:

The two men sat together in the rain. Behind them sat two other men who were wet and tired and slumped like clay that was melting. The lieutenant looked up. He had a face that once had been brown and now the rain had washed it pale, and the rain had washed the color from his eyes and they were white, as were his teeth, and as was his hair. He was all white. Even his uniform was beginning to turn white, and perhaps a little green with fungus.

– Ray Bradbury, The Long Rain

As an allegory for riding a bike in Cornwall this year, to date far and away the wettest on record, it’s perfect, with perhaps only the movement of riding as a defence against the creeping green fungus that has colonised every other surface this winter (to a greater degree than normal). It’s been… ‘challenging’.

The briefest respite, a couple of hours of sunshine down west..
A short-lived spell of clarity…
Not everywhere however.. clear spells tempered by the cloying humidity that translated into a thick, wet mist in places. The rain returned by evening, and stayed. No eggs for sale at this stall, even the chickens have been too depressed.

Indoor pursuits then…Now,  the phrase “they don’t make them like they used to” can be a bit of an “old dufferism”, however when it comes to bicycle hubs, they really really don’t. A mate handed me this pair of  fifty-five year old Campagnolo Record large flange hubs to build  into a wheelset for him. They are probably without a doubt, the finest bicycle hubs ever made… from the lubrication ports in the hub body and the beautifully polished bearing end caps, to the perfectly ground, ultra-hard bearing surfaces that make you feel all funny when you spin one in your hand. They’re simply glorious.

Classic hubs. The best ever.

They’re for a bike he has been restoring that, aside from being breathtakingly beautiful, has a rather lovely personal story to it that goes all the way back to the start of his racing career, more years ago than he really cares to think about. Anyway, the build is largely complete so we’re just waiting for some fine weather to get some pictures; we thought it might be fun to show it here, an antidote if you like to the ocean of carbon and black anodized parts that is the mainstream cycling world. It is, after all, very shiny indeed. Stay tuned for that.

Back to the hubs though, or rather Campagnolo. It’s not new news that the much-storied brand is suffering some financial difficulty. I was a committed Campagnolo user in the 90s, noughties, and 2010s, until I started to drift away from being a dedicated road cyclist, but also it was around then when the endless arms race between Shimano and Campagnolo (and SRAM), a race that Campag has been steadily losing for years for various reasons, started to produce the kind of componentry that made my eyes hurt in its ugliness. I feel like the pinnacle of the Campagnolo road groupset was probably late 9 speed or early 10 speed Record.. (although the early 8 speed group I had in the early 90s was pretty wonderful too, and glorious to look at). It still had the feel of bicycle components as art, elegant, highly polished designs with a wonderful mechanical feel, not overly complex, and yet with all the precision and performance that comes from years of evolution. I don’t know what the future holds for Campagnolo, but I cannot help thinking how nice it would be if they could just go back and re-release those groupsets from an earlier pre-carbon, pre-electronic era. Not as limited run, over-priced, special editions or anything silly like that, but rather as a permanent part of the product line, to stop trying to compete but instead embrace the growing desire amongst many cyclists to return to a time when bicycles didn’t need batteries, and a derailleur, or a crankset, could be a thing of beauty. I’d buy one and find a steel frame for it, and I know a very many other people would, especially in an era when the  Colnago Master, or Cinelli Supercorsa, are available to buy and crying out for a classic groupset. Probably the best that can be hoped for is that the brand doesn’t simply become just another name in the portfolio of a bunch of corporate vultures, and used to label a bunch of crap out of Taiwan.. not a million miles away from what happened with Suntour in 1988.

In used condition, but still lovely, and gives me the shivers whenever I twiddle the axle :-)

Speaking of things of beauty, I recently treated my backside to a new perch. To be clear, the ‘thing’ here being the saddle rather than my arse, although opinions may vary. Weirdly, returning to my bike after the enforced hiatus last autumn, I struggled to get on with the Cambium C17 that I’ve been using on my Cross Check for years… presumably, given time, I would have adapted once again but instead it was the perfect excuse to acquaint myself with a saddle that I’ve wanted to try for a while now. An Aspin from Gilles Berthoud in France. It’s leather, hurrah, but utterly unlike the more well known Brooks B17 with which it is usually compared. It feels very much like an engineered saddle rather than the continuation of years of tradition, and that is no bad thing. The creak-prone pressed steel frame of the Brooks is replaced by a composite frame with stainless steel rails, and the saddle is completely rebuildable too. The leather top is retained by a series of delightfully steampunk-esque torx fasteners, rather than rivets, positioned on the very rear of the saddle, well away from catching on shorts or whatever bottoms are being worn. The leather is also impressively thick, significantly more so than the Brooks.. this should be a very long lasting saddle.

Gilles Berthoud Aspin.. steampunk!

I’ve only put about 400 miles on it so far, so it is still breaking in, but so far so good.. I’m already a fan. Things I like in particular being that it feels somewhat flatter on top than both the C17, and B17 (and also the Swift I used to have but sold).. and of course being a tart, I also appreciate the way it looks. It is far and away the most expensive saddle I have ever bought, but in reality is not that much more than a new Brooks B17, and anyway you know what they say….  happy arse, happy cyclist. I have a feeling another one of these will find it’s way onto my Faran.

It shouldn’t matter perhaps, but it does.. elegant lines.
Thick vegetable-tanned leather.
The side profile is nice too. I really should swap out that scabbly old On-One Twelfty seatpost, it lets the saddle down ;-)
For comparison, next to a Brooks B17.. those things always end up needing lacing to curb the spreading of the sides, and the rub on my inner thighs can become annoying in some circumstances.

P.s yes I am a sci-fi nerd. I love reading sci-fi.

Filed under: Close to Home

12 thoughts on “Bits and Bobs for a Rainy Start to 2026”

  • I’ve never been that big on Campy. I like the look of the vintage stuff, yes, but I’m not the biggest old road bike person and am too practical and cheap to go after their components. That being said, Campagnolo should stop competing with SRAM and Shimano, as that race has been lost. Their best approach would be to emulate brands like Leica, where people will willingly pay a premium for nice stuff made the old way.

    I do like the look of that Berthoud saddle! If I got one I’d go for their wider selections. The base models don’t look that much more than Brooks these days.

    By the way, are you still making bags?

    • That’s fair enough.. as for the Leica approach, maybe, although it feels like cycling already has an ‘exclusivity problem’ so I hope not. It feels like it won’t be long before Shimano and Sram are entirely electronic apart from at the very bottom end, in which case there will definitely be a gap in the road bike ‘space’ for a half-decent mechanical road groupset at a moderate price that doesn’t have to be an eyesore.. Microshift seem to have the MTB and gravel side of things covered.. functionally at least.
      Bags.. not at the moment, I don’t have time. day job has been pretty intense for the last couple years to the point where I just need to switch off (and work on the hosue…) at the weekend rather than make bags. I’m not killing the idea off as I want to wind the software stuff back very soon.

      • Campy needs to figure out something. I took a look at their current derailleurs, and nothing really differentiates them aesthetically from the offerings from SRAM or Shimano, at least in my eyes. Leaning into their heritage would definitely make them stand out again.

        • they do! One challenge might be that the cycling demographic who remember and appreciate that heritage to the extent they’d drop serious £££ on it is likely to be shrinking, and those looking to ‘bling’ their bikes are probably just going for whatever is considered state of the art (electronic) and most expensive. Oh well, have to wait and see. It’s kind of a shame that we have this arms race situation.. it’s driven entirely by marketing.. the reality is that a groupset from, say 20yrs ago shifts just as well as one today.. but the drive to constantly make the stuff you already have obsolete has created the overpriced eyesores that grace so many bikes today. having said that, a lot of modern bikes are eyesores anyway so what does it matter ;-)

  • Please send a little of those rainy days my way. We could sure do with some in southern Australia.
    I sure do like the look of that Berthoud saddle, might be my next purchase.

    • You’d be more than welcome to them, wish I could oblige!
      I have to say, I’m very happy with the saddle. Despite the thickness of the leather it’s breaking in well and is starting to feel really nice.
      Cheers for checking in! I hope you get some of that rain soon.

  • When I saw the news about the re-introduction of the Cinelli Supercorsa frameset, my first thought was: ‘That’s very nice indeed, but about the only “ready to go” new groupset to put on it would be… Campagnolo Centaur? Nope, discontinued.’ It seems aimed at people who have collected a bunch of NOS stuff from the golden era.

    The Leica comment is an interesting one; I wouldn’t be surprised if Campagnolo eventually goes that route. But as Mike said—using the photography analogy—we also need a ‘Voigtländer’ level when it comes to price versus quality.

    The silver edition of Shimano Cues shows that they haven’t completely forgotten the old days, but it reminds me of ‘wannabe’ retro cameras from Nikon like the Df, Zf, and Zfc. From a distance, they may look like 1970s models, but the build quality is nowhere near the original standard. Having spent 16 years as a Nikon repairman, I witnessed their declining build quality firsthand.

    • re the Supercorsa, we’re on the same page… I have wanted one of those frames for decades, and keep thinking that if I did acquire one, the only thing I could do would be to trawl ebay for a few months and assemble a 1990s to early noughties Record group (or Chorus). A mate runs a bike shop, he’s putting together a new Colnago Master frame for a customer… it’s getting a modern group, in matt black, and it makes my brain itch… oh well.

      Older Nikon stuff just feels reassuring in the hand.. and that same lovely mechanical feel in use as older Campy stuff…

      • Did some more research. While Centaur appears to be discontinued, a rim brake version of Chorus is currently still available. Admittedly, it’s far from being period-correct for such a classic frame.

    • I Like that Voigtländer analogy. I wonder who exactly would do that in this day and age, though. The big problem with manufacturing is that we’ve spent decades “improving” things, using more automations, adding more plastics, making things more efficient, etc. that it’s hard to turn around and make things “like they used to” as the machines and the people who did that stuff are old. When Nikon decided to do those anniversary SP rangefinders earlier this century, they had to call back in those old engineers to help them out. They wouldn’t be able to do that now as they all are likely dead.

      Those who go into a more artisanal charge a premium for their offerings, partially because they can, partially because they have to. I grouse about the prices of Leica, but there’s reasons that they charge that much besides the “because they can” clause. And people are willing to pay that premium. But a camera is not a derailleur, and I doubt people would pay Leica prices for that.

      Getting back to Voigtländer, there are a few companies trying to do that. Rivendell released their OM-1 derailleur late last year. (It is not coincidental that the derailleur is named after Olympus’s famous SLR.) Priced at $150 USD it’s more than a Deore, yet the first small batch sold out in under an hour. I know that one of the reasons why they designed their own derailleur is the worry that Shimano et al would eventually have either high-end electronic derailleurs and low-end mechanical, with no middle.

      A personal aside, I wish I cared more about derailleurs. I just want one that works. I did want to get one of the OM-1s as I like supporting Riv. But I missed them during that first window and that was when I was rebuilding the drivetrain on my Bantam, so I kept the Deore and now I don’t have the mental energy to put a different derailleur on there.

      • I like the Riv rear mech and what it stands for, a high quality, non-electronic choice. The price is high but not nuts, and also reflects the small batch manufacturing I think… as for just wanting one that works, agreed, same, but tempered with having the sort of brain that itches when something doesn’t seem to look “right”.. (not just bikes). I’ve just picked up an older (albeit in almost new condition), polished, mid-range Campag rear mech with a medium cage to go on my old cross check, not because the vintage XT doesn’t work, it does, but rather because the campag one is polished rather than dull silver anodized.. it’s old enough that it still looks like a traditional rear mech too… and because it’s considered “undesirable” in the modern context (i.e not a collectable model) it was only £25. I couldn’t help it.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.